Željko Aščić

I just maked Knoppix to boot from USB Stick. Here are the steps and on what to watch.
First thing download the Knoppix ISO image from somewhere. Find USB stick big enough to hold Knoppix. 1 GB should do the work. Do not run anything if its not specified here!

1. Make some folder etc "Knoppix Stick Boot" somewhere on your pc.
2. Copy the Knoppix iso image to that folder.
3. I had Knoppix Nero image so i converted it to Iso with this little "nrg 2 iso" converter.
Converter is created by roland-illig.de. It is easy to use
4. Then download fixkp.zip and extract in folder "Knoppix Stick Boot". Do not run anything.
5. Go to "Knoppix Stick Boot" folder and run file named "fixkp.bat". Follow instructions.
Wait few minutes. Now new knoppix folder appeared.

Lets now prepare USB stick:

6. Format your stick in to FAT or FAT32 file system.
7. Now copy all content from "Knoppix Stick Boot\Knoppix\" to your stick
(Content from newly created folder after you runned fixkp.bat)
8. Run makeboot.bat from the USB stick!!! This will make the drive bootable.
Do not run this file in any case from your hdd!!! You will damage your system.
9. Restart PC and put in bios settings first boot device your USB. It is probably available under HDD section.

Do not pm me or mail me for posible problems. I tested this with some cheap USB stick 8 GB, win Vista gigabyte motherboard and old Knoppix 3.4. It will also work with Knoppix 5.1.1.
I am not responsible if you damage your pc in any way.