TECH -

HOW TO USE

Requirement
Two computers
One of which get processor supporting Intel VT, we call this Guest Machine(Rootkit run on it)
The other one is Host Machine, which monitors the Guest Machine.
A Serial Cable
GRUB Installed
Guest OS: Theoretically BitVisor can support any guest OS, but i recommend Windows(2K, XP, 2003). I had crash
experience under Ubuntu.
Compile Environment: Any Linux with GNU make and gcc would be ok, but I only tested under ubuntu.
Something that could monitor the serial port installed on Host Machine. I recommend GTKTerm
Steps
Connect the Guest Machine and Host Machine with serial cable
Checkout the code from the repository
Start a terminal, enter the root directory of the source code
You could use ./config.sh to do some configuration before make. But make sure the "TTY_SERIAL" and "RK_ANALYZER"
label are checked.
type make and get a cup of coffee.
if nothing get wrong here, you should get a executable named bitvisor.elf. Copy it to /boot/ on the Guest Machine
Modify menu.lst. Add following:
title BitVisor
root (hd0,0)
kernel /boot/bitvisor.elf
Make sure you substitute the (hd0,0) with proper location on your system.
Usage
Start serial port monitor(i.e. GTKTerm) on Host Machine
Boot the Guest Machine, first select "BitVisor" in the GRUB list, then bitvisor will boot GRUB again, so you could
select the operating system you want this time. If All things got right, you would see the following in GTKTerm:


source


for more info please click here