My OperaFloor Marking Tapes and Color
Thursday, April 5, 2012 5:40:16 AM
When you walk through an industrial facility, you are bound to note the strips of tape running on the floor, that seem to point sections, boundaries, pathways and other lines whose purpose it can be to maintain organization and safety inside location. You may have remarked that these lines, which involve dozens of feet of floor marking tapes, come in a number of different colors. What you may not know, however, is what these colors signify, so it's possible you'll assume that the hue variance is there to spice up the looks of the location. On the average warehouse or factory worker, however, those colors could necessarily mean the difference between a safe day then one marred by an accident or an injury. The Occupational Health and Safety Administration has provided a few guidelines to color-code floor marking tapes, so they serve their function the majority efficiently.
Yellow is the most common color that you will run into, considered the foundation unbiased color for floor marking tapes, and will be used for separation associated with different areas, as well concerning map out the pathways for both human and mechanical traffic. If it's orange, it doesn't mean anything special, in other key phrases, although the bright and commanding color does draw your attention to the lines, and compels want you to observe them.
White is another color of in comparison non-consequence, used to identify adequate storing areas for things like carts, racks and benches. These objects may not be inherently dangerous, and form the staple equipment in lots of warehouses and factories, but they do need a place to be parked afterwards of the day, so it was determined that white would represent them.
Whenever you see red, you very quickly recognize it as a color of warning, with restriction. From the traffic lights to the stop signs, and even, if you think about this, the color of warfare and blood, red results in that you shouldn't be treading around or past the appropriately marked area. In industrial facilities, red signifies danger, either from heavy machinery that could easily crush a person's limbs, or hazardous objects such as power lines. Trust myself, you don't want to accidentally find yourself on the receiving end of one such potentially perilous things.
Red is another color associated with warning, perhaps not as urgent or restrictive as red, but one that can make you think twice about stepping over a great orange line. While red encompasses danger of types, orange is mainly raised for inciting caution around devices. This is most probably due to the fact that people realize how dangerous these machines may be, but are forced to work with them on a regular basis anyway.
Blue, in vengeance of its cooler ringtones, also compels one to be careful, though the level of possible harm is probably lower. Floor marking tapes within blue indicate machines that are in need of repair. Sitting around, they definitely isn't dangerous, but if they can be operated by the unwary, then the doors open for disaster to happen. As such, clearly, the colors of floor marking tapes act not only to diversify the lines, but to convey fundamental information.
REFERENCE:
http://www.ambravallo.com/Art/305811/8/Industrial-Marking-Equipment-To-Meet-Your-Needs.html
http://www.realestatearticles4u.com/Art/326047/223/Industrial-Marking-Gear-For-Your-Needs.html
http://www.world-class-articles.com/Art/419877/92/Industrial-Marking-Gear-For-Your-Needs.html
Yellow is the most common color that you will run into, considered the foundation unbiased color for floor marking tapes, and will be used for separation associated with different areas, as well concerning map out the pathways for both human and mechanical traffic. If it's orange, it doesn't mean anything special, in other key phrases, although the bright and commanding color does draw your attention to the lines, and compels want you to observe them.
White is another color of in comparison non-consequence, used to identify adequate storing areas for things like carts, racks and benches. These objects may not be inherently dangerous, and form the staple equipment in lots of warehouses and factories, but they do need a place to be parked afterwards of the day, so it was determined that white would represent them.
Whenever you see red, you very quickly recognize it as a color of warning, with restriction. From the traffic lights to the stop signs, and even, if you think about this, the color of warfare and blood, red results in that you shouldn't be treading around or past the appropriately marked area. In industrial facilities, red signifies danger, either from heavy machinery that could easily crush a person's limbs, or hazardous objects such as power lines. Trust myself, you don't want to accidentally find yourself on the receiving end of one such potentially perilous things.
Red is another color associated with warning, perhaps not as urgent or restrictive as red, but one that can make you think twice about stepping over a great orange line. While red encompasses danger of types, orange is mainly raised for inciting caution around devices. This is most probably due to the fact that people realize how dangerous these machines may be, but are forced to work with them on a regular basis anyway.
Blue, in vengeance of its cooler ringtones, also compels one to be careful, though the level of possible harm is probably lower. Floor marking tapes within blue indicate machines that are in need of repair. Sitting around, they definitely isn't dangerous, but if they can be operated by the unwary, then the doors open for disaster to happen. As such, clearly, the colors of floor marking tapes act not only to diversify the lines, but to convey fundamental information.
REFERENCE:
http://www.ambravallo.com/Art/305811/8/Industrial-Marking-Equipment-To-Meet-Your-Needs.html
http://www.realestatearticles4u.com/Art/326047/223/Industrial-Marking-Gear-For-Your-Needs.html
http://www.world-class-articles.com/Art/419877/92/Industrial-Marking-Gear-For-Your-Needs.html
