fargo hardwood flooring

Lumber, otherwise know as timber, is prepared wood that is used for secondary construction. Timber is used for a number of different purposes such as building homes and making furniture. Timber is also specially treated and converted to make paper products. It is provided in one of two forms which are rough or finished. Rough is in its most natural form and finished timber has been treated and is ready for secondary use.

The wood is cut into planks and distributed for secondary purposes. The most common sizes for the cuts of wood are 2x2 and 4x4. There are several different types of timber. Each one is used for specific purposes. This is commonly referred to as engineered timber. Depending on how the wood is treated with affect what is made from the wood. Some planks are purposed for doors or roofing while others may be used for floor boards.

Timber is vulnerable to certain defects. Wood contains a lot of moisture. When there is too much moisture, fungus develops. Fungus destroys the quality of the wood making it no good for construction means. The fungus growth will lead to rot. There are several different forms of rot from dry rot to brown rot. Timber that has this defect cannot be used and will be eliminated from distribution.

Other forms of defects that occur naturally in the wood is decay from insects. Many different types of insects feed off of wood. There are certain ants, termites and beetles that cause major decay in timber. The use of pesticides addresses this issue. Timber is treated with pesticides to prevent infestation. This form of decay also makes the wood unusable.

There are different kinds of preservatives that are applied to timber to protect it from the various forms of decay. These are chemical treatments that are sprayed on to the cut timber. There are less dangerous chemicals available that offer more environmentally friendly ingredients. These green products are also biodegradable. Wood that is going to be used for construction must be first treated if it is going to maintain its quality.

There is also timber that is first dried in a kiln before it is used. The kiln removes most of the woods moisture content. Green timber is freshly cut wood. This type of wood contains a lot of moisture. This method is not always used to dry wood. Sometimes the wood is left to air dry to remove its moisture.

There is also the process of drying the timber by using a kiln. There are kiln specially designed for timber processing. The heat from the kiln dries out any existing moisture in the wood which will prevent decay and rot. The kiln is set to exact temperatures that will not cause the timber to crack. Kilns are used in most cases but timber can also dry naturally. Air drying wood takes a lot longer than the kiln and is not as effective.

Lumber is used for a lot of different wood working purposes. They can be used as materials for major constructions like homes. Or they can be used to make furniture. Timber is also treated to produce paper products. Timber is available for industrial, commercial and private use. Individuals can purchase dimensional timber at any large home center facility. It is important to be knowledgeable in the type of wood needed. There is soft and hardwood. Most projects require softwood.

fargo hardwood flooring

fargo nd hardwood flooring

Looking to build on to that new addition you've always wanted or you just need to replace some trim; then visit your local lumber store. They have a wide selection of trims, boards and much more.

fargo hardwood flooring: fargo nd hardwood flooring

This article, the best article ever, kindly provided by UberArticles.com