My OperaLaser Alignment manufacturers
Monday, February 4, 2013 10:17:23 AM
Our entry product, the Fixturlaser GO Basic, comes with high tech hardware and software, and many functions to increase the user friendliness. As with all the other Express Alignment products, the Fixturlaser GO Basic also uses the innovative and remarkable Express Go Basic product manufactured by Fixturlaser & we are marketing the same in association with M/s. SPM Mumbai.
MEMORY MANAGER Alignment measurement units that will save you a lot of time and headache.
Measurement Technique and Accuracy
All Fixturlaser shaft alignment tools use two measurement units, i.e. two laser beams. With the integrated innovative technology, 30 mm CCD sen-sors and line laser, we have virtually eliminated rough alignment.
This is a benefit you would not enjoy with the measurement technique that uses only one laser beam. With such an alignment tool, you would have to remeasure after each and every adjustment.
The measurement units also deliver extremely high measurement accuracy. Measurement readings are taken in three positions with a minimum of 45° shaft rotation between them. You can sample up to 40 measurements points in each position giving a total of 120 points for calculation of a pos-sible machine misalignment.
Also, the CCD sensors allow for digital signal quality control, further en-hancing the measurement accuracy.
Intuitive User Interface
Our intuitive user interface that is based on icons and symbols, thus elimi-nating any language barriers, will guide you throughout the measurement and adjustment process.
The rotation guide indicates with black or white fields if you are within the permitted measurement area or not.
The measurement result is shown as coupling values and foot values for horizontal and vertical direction. The result field is enhanced with symbols indicating angular and/or offset errors.
During the measurement process, an angle guide will help you reach the correct measurement position. Arrows by the machine’s feet will show you in which direction the machine needs to be moved.
MEMORY MANAGER Alignment measurement units that will save you a lot of time and headache.
Measurement Technique and Accuracy
All Fixturlaser shaft alignment tools use two measurement units, i.e. two laser beams. With the integrated innovative technology, 30 mm CCD sen-sors and line laser, we have virtually eliminated rough alignment.
This is a benefit you would not enjoy with the measurement technique that uses only one laser beam. With such an alignment tool, you would have to remeasure after each and every adjustment.
The measurement units also deliver extremely high measurement accuracy. Measurement readings are taken in three positions with a minimum of 45° shaft rotation between them. You can sample up to 40 measurements points in each position giving a total of 120 points for calculation of a pos-sible machine misalignment.
Also, the CCD sensors allow for digital signal quality control, further en-hancing the measurement accuracy.
Intuitive User Interface
Our intuitive user interface that is based on icons and symbols, thus elimi-nating any language barriers, will guide you throughout the measurement and adjustment process.
The rotation guide indicates with black or white fields if you are within the permitted measurement area or not.
The measurement result is shown as coupling values and foot values for horizontal and vertical direction. The result field is enhanced with symbols indicating angular and/or offset errors.
During the measurement process, an angle guide will help you reach the correct measurement position. Arrows by the machine’s feet will show you in which direction the machine needs to be moved.
