Me, My Self & My Blog

Check the Link Below to Discover the True face of ISLAM

http://defending-islam.blogspot.com/2008/05/true-face-of-islam.html

Connect your phone via datacable
open terminal & type

lsusb

now you will get the following output

owais@owais-desktop:~$ lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 0421:0445 Nokia Mobile Phones
Bus 001 Device 002: ID 046d:092f Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
owais@owais-desktop:~$


it is on my compter,your will not be exactly the same...

Now note the line in which NOkia Mobile Phones is written...it has two number one is 0421 & other is 0445...we'll take these numbers as 0x421 & 0x445

0421 is the Vendor ID & 0445 is the Product ID

Now enter this command.

sudo /sbin/modprobe usbserial vendor=0x(vid) product=0x(pid)

eg, in my case::: sudo /sbin/modprobe usbserial vendor=0×421 product=0×445

Now enter this command

wvdialconf /etc/wvdial.conf


u'll get a long output which will be like

Scanning your serial ports for a modem.
Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttyACM0: ATQ0 V1 E1 — OK
ttyACM0: ATQ0 V1 E1 Z — OK
ttyACM0: ATQ0 V1 E1 S0=0 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM0: Modem Identifier: ATI — Nokia
ttyACM0: Speed 4800: AT — OK
ttyACM0: Speed 9600: AT — OK
ttyACM0: Speed 19200: AT — OK
ttyACM0: Speed 38400: AT — OK
ttyACM0: Speed 57600: AT — OK
ttyACM0: Speed 115200: AT — OK
ttyACM0: Speed 230400: AT — OK
ttyACM0: Speed 460800: AT — OK
ttyACM0: Max speed is 460800; that should be safe.
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
Found an USB modem on /dev/ttyACM0.
Modem configuration written to create.
ttyACM0: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″


Notice the output says that there is a modem at /dev/ttyACM0 & max speed is 460800

now enter this command

sudo gedit /etc/wvdial.conf

A file will open in text editor...paste the following there
(Your phone number may vary depending on your provider....Call em' now....)

Phone = *99#
Username = username
Password = password
Stupid Mode = 1



You Can Also delete everything & paste this

[Dialer Defaults]
Modem = Your Modem Name(eg, /dev/ttyACM0 in my case)
Baud = ur max speed(460800 in my case)
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = *99#
Username = username
Password = password
Stupid Mode = 1

save the file & you are done


Whenevr you need to connect...open terminal & type

wvdial

wait till some sort of IP adress is displayed like

pppd: �[06][06][08]` [06][08]
primary DNS address 218.248.240.135
pppd: �[06][06][08]` [06][08]
secondary DNS address 218.248.240.79
pppd: �[06][06][08]` [06][08]

Now you are connected....hit cntrl+c to dissconnect...



You can also create a laucher on desktop(application in terminal) & keep the command as wvdial..now double click it to connected connected.

Hi everyone//// below is a screenshot of my LinuX Desktop..where i have somehow managed to run windows 3.1 inside Linux...hehe...Yes!!! your eyes are allrigt..thats windows3.1 running inside a window under Linux....:-)