The general assembly of computer steps
Monday, 8. December 2008, 05:59:20
The vast majority of computer hardware is installed on the motherboard, the motherboard is installed is often the first step in the computer installed.
The general steps to install a computer
(1) ready chassis and power, the main power supply chassis coat well.
(2) inserted in the motherboard CPU processor load.
(3) in the memory installed on the motherboard.
(4) in the case has been fixed in a good plug CUP, the memory of the motherboard.
(5) to connect the power supply on board.
(6) to connect chassis switches on the panel, light and jumper on the motherboard.
(7) video card installed.
(8) to install monitors.
(9) to test the basic power system is good or bad.
(10) chassis frequency digital display panel on the installation (optional).
(11) to install the hard disk drive.
(12) to install a floppy drive.
(13) to install other add-on card, such as sound cards, MPEG card, Modem card, SCSI interface card.
(14) to install a keyboard, mouse, printer and so on.
(15) to connect the various parts of the power plug.
(16) for a final check prior to the start.
(17) boot inspection, testing.
(18) to run BIOS setup program, the system CMOS parameters.
(19) Save the new configuration and restart the system.
The above steps are the same, can be adjusted in accordance with specific circumstances in order to facilitate the installation of reliable criteria for the installation of the order.
The general steps to install a computer
(1) ready chassis and power, the main power supply chassis coat well.
(2) inserted in the motherboard CPU processor load.
(3) in the memory installed on the motherboard.
(4) in the case has been fixed in a good plug CUP, the memory of the motherboard.
(5) to connect the power supply on board.
(6) to connect chassis switches on the panel, light and jumper on the motherboard.
(7) video card installed.
(8) to install monitors.
(9) to test the basic power system is good or bad.
(10) chassis frequency digital display panel on the installation (optional).
(11) to install the hard disk drive.
(12) to install a floppy drive.
(13) to install other add-on card, such as sound cards, MPEG card, Modem card, SCSI interface card.
(14) to install a keyboard, mouse, printer and so on.
(15) to connect the various parts of the power plug.
(16) for a final check prior to the start.
(17) boot inspection, testing.
(18) to run BIOS setup program, the system CMOS parameters.
(19) Save the new configuration and restart the system.
The above steps are the same, can be adjusted in accordance with specific circumstances in order to facilitate the installation of reliable criteria for the installation of the order.
WIDGETIZE